Makale

Makaleler

Temel Cisco IOS Komutları

IOS Basics

Router>? – Display the help menu

Router>enable – Enter privileged EXEC mode

Router#disable – Exit privileged mode to go back to user EXEC mode

exit – Exit from any mode

Router#reload – Restart the router

Router#trace 19.0.0.1 – Send a trace route to IP address 19.0.0.1

Router#ping 1.0.0.2 – Send a ping request to the IP address 1.0.0.2

Router#ping 172.16.0.1 source loopback 1 – Ping the IP 172.16.0.1 with a source IP address of the loopback 1 interface

Router#show version – Shows information about the router, including the configuration register value

Router#show startup-config – Displays the startup configuration

Router#show running-config – Displays the running configuration

Router#copy running-config startup-config – Save the running configuration to the startup configuration

Router#config terminal – Enter global configuration mode

Router(config)#hostname NewYork – Change the system’s network name to NewYork

Router(config)#enable password cisco – Set the enable password to cisco

Router(config)#enable secret cisco123 – Set the enable secret password to cisco123

Router(config)#banner motd # Property of InternetworkTraining.com # – Configure a message of the day banner

Router(config)#config-register 0x2142 – Change the config register to ignore contents of NVRAM

Router(config)#line console 0 – Configure the line console

Router(config-line)#login – Enable password checking in line configuration mode

Router(config)#line aux 0 – Configure the auxiliary line

Router(config)#line vty 0 4 – Configure the virtual terminal lines

Configuring Router Interfaces

Router#config terminal – Enter global configuration mode

Router(config)#interface s0/0 – Configure the serial 0/0 interface Devamını Oku »

Cisco Router ve Switch Temel Konfigürasyonları

Cisco Router ve Switch Temel Konfigürasyonları
Gereksinim: Console password’ü düzenlemekRouter(config)#line con 0
Router(config-line)#login
Router(config-line)#password cisco

Gereksinim: Bir telnet password’ü düzenlemek

Router(config)#line vty 0 4
Router(config-line)#login
Router(config-line)#password cisco

Gereksinim: Password kullanmak.

Router(config)#enable password cisco

Gereksinim: secret password intelnet.

Router(config)#enable secret intelnet

Gereksinim: Bir interface’i enable etmek

Router(config-if)#no shutdown

Gereksinim: Bir interface’i disable etmek

Router(config-if)#shutdown

Gereksinim: router için clock rate düzenlemek (64K)

Router(config-if)clock rate 64000

Gereksinim: Serial interface’e bir logical
bandwidth ataması (64K)

Router(config-if)bandwidth 64 Devamını Oku »